Fix graphics device problems with error code 43

Tim Fisher has 30+ years' professional giải pháp công nghệ experience. He focuses on tư vấn and Microsoft topics but is an expert in all areas of tech. He's also the VP và General Manager of trinhde.vn.

You watching: Fix graphics device problems with error code 43


*

There is always the chance that the error Code 43 you"re seeing on a device was caused by some temporary problem with the hardware. If so, a restart of your computer might fix the Code 43 error.


Some people have sầu also reported that powering off their computer completely (not just a restart) & then turning it baông chồng on has corrected their Code 43 warning if it sources from a USB device. In the case of a máy tính xách tay, turn it off & remove sầu the battery, wait a few minutes, & then put the battery back in & start the computer.


Plug the device into a different computer & then properly eject it from there. Plug it bachồng into your computer khổng lồ see if it fixes the Code 43 error.


*

If you have another computer khổng lồ thử nghiệm this on, be sure to lớn try this before moving on khổng lồ the more complicated steps below.


Did you install a device or make a change in Device Manager just before the Code 43 error appeared? If so, it"s possible that the change you made caused the Code 43 error. Unvày the change if you can, restart your PC, & then check again for the Code 43 error.

Depending on the changes you made, some solutions might include:

Removing or reconfiguring the newly installed device

Disable the device và then re-enable it. This step provides Windows with a chance to lớn take a fresh look at configuring the device.

This might sound lượt thích a very simple fix, & that"s because it is. However, this procedure might be all the computer needs to lớn correct the Code 43 error.


Reinstall the drivers for the device. Uninstalling and then reinstalling the drivers for the device is a possible solution to a Code 43 error.


If a USB device is generating the Code 43 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. This includes any USB Mass Storage Device, USB Host Controller, and USB Root Hub.

See more: Top 4 Phim Hồ Ly Chín Đuôi Tình Duyên Hay Nhất Màn Ảnh Trung


Properly reinstalling a driver, as in the instructions linked above, is not the same as simply updating a driver. A full driver reinstall involves completely removing the currently installed driver & then letting Windows install it over again from scratch.


Update the drivers for the device. It"s also possible that installing the lakiểm tra drivers for the device could correct the Code 43 error.

If updating the drivers does remove the Code 43 error, it means that the stored Windows drivers you reinstalled in Step 4 were probably damaged or were the wrong drivers.


Install the latest Windows service paông xã. One of Microsoft"s service packs or other patches for Windows might contain a fix for whatever might be causing the Code 43 error, so if you"re not fully updated, bởi so now.


Update BIOS. In some situations, an outdated BIOS could be causing a specific issue with a device that"smaking it report a problem khổng lồ Windows—thus the Code 43 error.


Replace the data cable that connects the device lớn the computer, assuming it has one. This potential fix for a Code 43 error is most often useful if you"re seeing the error on an external device lượt thích a USB or FireWire device.


Purchase a powered USB hub if the Code 43 error is showing up for a USB device. Some USB devices need more power than the USB ports that are built into your computer can provide. Plugging those devices into lớn a powered USB hub solves that challenge.


Replace the hardware. A problem with the device itself might be causing the Code 43 error, in which case replacing the hardware is your next logical step. In most cases, this is the solution to a Code 43 error but try the easier, & không tính tiền, software-based troubleshooting ideas first.


If you"re positive sầu that a hardware problem isn"t causing the Code 43 error, you could try a repair install of Windows. If that doesn"t work, try a clean install of Windows. We don"t recommover doing either before you replace the hardware, but you may have to lớn give sầu them a try if you"re out of other options.

See more: Game Bắn Cá Ăn Xu Cho Máy Tính, Game Bắn Cá Ăn Xu


Another possibility, while not very likely, is that the device is incompatible with your version of Windows. You can always kiểm tra the Windows HCL khổng lồ be sure.